Create custom lighting effects with this 44-key IR remote control and LED control unit. It’s specifically designed to work with 12V DC RGB LED flexible strips, and allows you to adjust brightness, customize light color, set fade in/out, and adjust flash rate. This model supports up to 5 meters of RGB LED flexible strips. Other tri-color, common anode LEDs may be used if configured to work with 12V DC supply voltage by means of voltage dropping resistors. IR remote control uses a CR2025 battery (included), and requires a 12V DC power supply (not included).
Programming DIY Keys
To use the DIY memory keys, press the desired memory key, then use the RGB arrow keys to adjust to desired color. Next, press the DIY memory key again to save the color.
Due to the IR operation of this product, it is possible for remote controls of other devices to inadvertently change LED settings.
*Input Voltage: 12V DC
*Output Wattage: 72 Watts max
*Output Current: 6 Amps max
*Control Distance: 10ft or 3m
*Operating Temperatures: -4~120F or -20~50C
*Remote: Infrared (Included)
*Dimensions: Controller box: 2.48″L x 1.38″W x 0.875″H
16 colors, 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change.
16-classes Static Mode Dim Control:
16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change.
Input Voltage: 12V (Power supply is not included. You can easily connect to the standard notebook computer power supply)
6 DIY keys, you adjust the R/G/B color freely