rings, clothing, shopping, bracelets




buy now

$434.99

Features:

Peavey 410 Professional Guitar Full Range Stereo PA Cabinet with (4) 10″ Speakers
Great for guitar cabinet, keyboards, PA mains, and professional karaoke systems
Power Output: 3,200 Watts Peak , 1,600 Watts Program, 800 Watts RMS
Each terminal is 4 ohms
Two RX14 tweeters
(4) Pro 10″ Neodimium driver woofers
3/4″ wood cabinet
Tolex covering
Vintage Peavey aluminum strips
Heavy duty corners & handles
Made In USA
Peavey RX14 1.4″ Tweeter
Nominal Efficiency: 30%
Frequency Response: 1.5 kHz to 20 kHz
Recommended Crossover: 1,800 Hz at 12 dB / Octave
Diaphragm: Commercially pure titanium
Vas: 25.1 L
Cms: 150.0 uM/N
Mms: 36.9 gm
Qms: 2.85
Qes: 0.46
Qts: 0.40
Xmax (mm) 2.5 mm
Le: 0.72 mH
No: 1.7%
Vd: 10.6 cu. in. (173 ml) program
Disp: 95.45 cu. in. (1,564 ml)
Weight: 4.5 lbs. (2.0 kg)
Peavey PS2PA ESCORT 3000 300 Watt RMS Powered 4-Channel PA Mixer Amplifier 
Peak Output Power: 300 Watts
RMS Output: 150 Watts
Inputs for (2) Speakers
Frequency Response: 30 Hz to 25 kHz +0/-3 dB measured at 1 Watt
Overload Protection: DDT (Distortion Detection Technology) limits the power
amplifier input to prevent clipping distortion that can damage
speakers
True 2 channel stereo power amplifier built into the mixer
Each amp channel is 4 ohm
Max Gain: 86 dB mic input to speaker output
Signal/Noise Ratio: 85 dB mic input typical
Reverb: Digital
AC Power: 115 VAC 60 Hz or 230 VAC 50/60 H
Peavey 410 Professional Guitar Full Range Stereo PA Cabinet with (4) 10″ Speakers. Great for guitar cabinet, keyboards, PA mains, and professional karaoke systems. 2 inputs- you can plug 2 different power amps into the cabinet or plug 1 channel of the amp to input A and one channel of the amp into input B. 2-channel cabinet. 4×10 stereo “Guitar Stack” cabinet. Power Output: 3,200 Watts Peak , 1,600 Watts Program, 800 Watts RMS. Each terminal is 4 ohms. Two RX14 tweeters.
Peavey RX14 1.4″ Tweeter. Throat Parameter: 938″ / 23.8 mm. Nominal Impedance: 8 Ohms. Minimum Impedance: 7.1 Ohms. DC Resistance: 6.8 Ohms. Power Capacity 1000 Hz to 20,000 Hz: 120 W peak60 W program30 W continuous. Sensitivity: 104 dB SPL 1 Watt at 1 meter On-axis on 90º H x 45º V horn. Nominal Efficiency: 30%. Frequency Response: 1.5 kHz to 20 kHz. Recommended Crossover: 1,800 Hz at 12 dB / Octave. Diaphragm: Commercially pure titanium.
Voice Coil Diameter: 1.4″ / 34.4 mm. Voice Coil Material: Edge-wound ribbon with high temp Kapton bobbin. Flux Density: 11,500 gauss (1.15T). Dimensions: 3.54″ (90 mm) diameter 2.40″ (61 mm) depth. Power handling: 200 watts continuous, 400 watts program, 800 watts peak. Impedance: 8 ohms. Frequency range: 50 Hz – 4 kHz. SPL: 94.3 dB, 1W/1m. VCdia: 2.5″ (63.5 mm). Re: 6.00 ohms. Sd: 0.04 sq. m. BL: 14.33 T/M. Fo: 67.7 Hz. Vas: 25.1 L.
Peavey PS2PA ESCORT 3000 300 Watt RMS Powered 4-Channel PA Mixer Amplifier. Peak Output Power: 300 Watts. RMS Output: 150 Watts. Inputs for (2) Speakers. Frequency Response: 30 Hz to 25 kHz +0/-3 dB measured at 1 Watt. Overload Protection: DDT (Distortion Detection Technology) limits the power. amplifier input to prevent clipping distortion that can damage. speakers. True 2 channel stereo power amplifier built into the mixer. Each amp channel is 4 ohm.
USB MP3 plackback. Patented FLS (Feedback locating system). Digital multi-effects. LCD screen for ease of file playback and effect selection. Custom rubberized knobs. Tone Controls: Bass: 100 Hz +/- 10 dB. Treble: 10 kHz +/- 10 dB. Graphic Equalizer: 5 bands: 100 Hz, 350 Hz, 1 kHz, 3 kHz and 8 kHz With FLS (Feedback Locating System). Input Impedance: Mic Input: 2 K Ohms. Line Input: 12 K Ohms. Distortion: Less than 0.8% THD at rated output.

rings, clothing, shopping, bracelets